Specifications
| Internal length | 5.89 m|19′ 4″ |
| Internal width | 2.345 m|7′ 8¼″ |
| Internal height | 2.38 m|7′ 9¾″ |
| Door width | 2.335 m|7′ 8″ |
| Door height | 2.27 m|7′ 5¼″ |
| Capacity | 32.9 m³|1,162 ft³ |
| Tare weight | 2,450 kg|5,401 lb |
| Maximum payload | 28,030 kg|61,796 lb |
| Maximum gross weight | 30,480 kg|67,197 lb |
| TEU | 1 |
What it is for
Free-flowing dry bulk — grain, resin, malt — loaded through roof hatches and discharged by tipping.
Others in the same family
20' Standard
General purpose, closed on all sides.
40' Standard
Twice the length, same cross-section.
Provided for convenience and general information only.Figures, definitions and descriptions on these pages are compiled from publicly available sources — published industry standards, official code registers and carriers' own published specifications — and are nominal: actual equipment, regulations and commercial terms vary by manufacturer, carrier, jurisdiction and contract, and change over time. FrateZone is not the issuing authority for any of it, does not warrant that any figure here is correct, current or complete, and makes no representation that a source has not changed since it was read. Where a specification belongs to a specific physical unit or a specific contract — a container's certified plate, an airline's tariff, the wording of your own sale agreement — that document governs, not this page. FrateZone accepts no liability for any error or omission here, nor for any operational, commercial, financial or legal decision taken in reliance on it. Verify against the authoritative source before you act.